Davis Connect Data Plan - 15 Minute Upload Interval

Brand: Davis Instruments

Explanation:

After purchase, you will receive an e-mail with an Activation Code to register online. Steps for setup:

1. 
   Follow the instructions in the e-mail or go to WeatherLink.com → Register → Select “Vantage Connect.”
   
2. 
   Read and agree to the Terms of Use.
   
3. 
   Enter the DID and KEY from the sticker on the cover of the manual and inside the Vantage Connect shelter.
   
4. 
   Create a user name, password, and enter your e-mail address.
   
5. 
   Set your time zone and Daylight Saving preference.
   
6. 
   Enter the Activation Code from the e-mail.
   
7. 
   Click “Continue with Registration” and agree to the Service Agreement.
   
8. 
   Click “Create Account.”
   

Vantage Connect Configuration:

• 
  Reporting Stations & Units of Measure: Enter the transmitter ID of each station (up to 8). Choose station type. If using repeaters, enable them and assign the final repeater’s ID. Select preferred units and click Save.
  
• 
  Device Settings: Enter elevation for accurate barometric pressure, select anemometer and rain collector types, input year-to-date rainfall and rain season start. Optionally set station alarms (up to 20/day). Calibrate temperature, humidity, and wind readings if necessary. For wind direction, enter true orientation in degrees (1–359°). Click Save.
  
• 
  Clear Highs and Lows: Remove erroneous data created during installation. Click “Clear Selected Data” or Cancel.
  
• 
  My Account: Enter city, state, country, latitude & longitude, station name, station type, 24-hour display preference, and privacy setting. Click Save.
  

Settings are pushed to Vantage Connect at the first update after powering. Changes will appear on WeatherLink.com after at least 2 update intervals (5, 15, or 60 minutes depending on plan).

Power: Battery Only